clean Safe disk cleanup
Start with --dry-run to see disk usage and the planned steps, then add -y to apply them. Docker prune and kernel removal are off by default.
$ curl -fsSL xyz.sh/clean | bash
At a glance
- What it does
- Start with --dry-run to see disk usage and the planned steps, then add -y to apply them. Docker prune and kernel removal are off by default.
- Supported OS
- Debian, Ubuntu, CentOS, Rocky, AlmaLinux · Root required
- Command
curl -fsSL xyz.sh/clean | bash- What it changes
- A conservative one-shot cleanup: apt / yum / dnf caches, a journal vacuum to 100M, disabled snap revisions, unused /tmp files older than 7 days, and oversized rotated logs under /var/log.
- How to undo it
- This is a one-shot cleanup. It installs no standing service and has nothing to uninstall.
- Last verified
cleanupb261c9d88934e7bb710b30b3e66ca76b0bbf950880b50eacac68b678cc68cceb
· Matches the script curl receives. You can also fetch /clean.sh.sha256
Every script passes bash -n and ShellCheck and was tested with curl | bash as root in the official Docker images of Debian 12/11, Ubuntu 24.04/22.04/20.04/18.04, Rocky 9, AlmaLinux 9 and CentOS 7 (see “Container test results” on each page). Containers lack systemd, kernel modules and real public routes, so those parts still need a real VPS.
What it does
A conservative one-shot cleanup: apt / yum / dnf caches, a journal vacuum to 100M, disabled snap revisions, unused /tmp files older than 7 days, and oversized rotated logs under /var/log. df is printed before and after. docker system prune requires --docker (no -a or --volumes). Old kernels require --kernels and the running kernel is always skipped. --dry-run only lists the plan; without -y it asks first.
Container test results
Results of curl | bash as root without a terminal in each distribution's official Docker image. partial means the container could not verify everything (for example no systemd, no kernel module, or the test protocol blocked by the test environment's proxy) and a real VPS is needed to confirm. (2026-11-12)
| OS | Result |
|---|---|
| debian:12 | pass |
| debian:11 | pass |
| ubuntu:24.04 | pass |
| ubuntu:22.04 | pass |
| ubuntu:20.04 | pass |
| ubuntu:18.04 | pass |
| rockylinux:9 | pass |
| almalinux:9 | pass |
| centos:7 | pass |
FAQ
- Will it delete in-use files or the running kernel?
- By default it only clears package caches, vacuums the journal to 100M, removes disabled snap revisions, stale unused /tmp files older than 7 days, and oversized rotated logs under /var/log. Active logs are not truncated. Old kernels are touched only with --kernels, and the kernel uname -r reports is skipped.
- Do I need root?
- Yes. The caches and logs it cleans belong to the system.
- Will --docker delete my container data?
- It does not pass -a or --volumes: it is docker system prune -f, which removes unused images, stopped containers and unused networks. Running containers and named volumes stay. Preview with --dry-run first, and confirm again on a production host.
- Which operating systems are supported?
- Declared support: Debian, Ubuntu, CentOS, Rocky Linux and AlmaLinux. Package-cache cleaning follows apt, dnf or yum.
Beginner guides
Full source
This is exactly what curl receives (common library + script body). Read it before running.
#!/usr/bin/env bash
# Served by xyz.sh/clean
# Human-readable page: https://xyz.sh/clean
# This file is the common library followed by the script body.
# No telemetry is added by xyz.sh.
# =============================================================================
# xyz.sh common library
# Shared helpers for every script served by xyz.sh.
#
# Promises:
# - No telemetry, analytics, or background "phone-home" calls
# - No hidden installs or config changes beyond what the script announces
# - Official upstream URLs are printed before any remote code is executed
# - Destructive or system-changing steps ask for confirmation (or YES=1 / -y)
# =============================================================================
if [[ -n "${XYZ_COMMON_LOADED:-}" ]]; then
# When sourced a second time, return. When executed as a file, return fails.
# shellcheck disable=SC2317
return 0 2>/dev/null || true
fi
# shellcheck disable=SC2034
XYZ_COMMON_LOADED=1
set -euo pipefail
XYZ_VERSION="1.5.0"
XYZ_BASE="${XYZ_BASE:-https://xyz.sh}"
XYZ_NAME="${XYZ_NAME:-unknown}"
# --- language ---------------------------------------------------------------
# Override with XYZ_LANG=zh or XYZ_LANG=en.
if [[ -z "${XYZ_LANG:-}" ]]; then
case "${LC_ALL:-${LC_MESSAGES:-${LANG:-}}}" in
zh*|ZH*|cmn*|CMN*) XYZ_LANG="zh" ;;
*) XYZ_LANG="en" ;;
esac
fi
xyz_t() {
# xyz_t "English text" "中文文本"
if [[ "${XYZ_LANG}" == "zh" ]]; then
printf '%s' "${2:-$1}"
else
printf '%s' "$1"
fi
}
# --- colors (TTY only) ------------------------------------------------------
# XYZ_COLOR=always|never|auto (default auto: TTY and no NO_COLOR); --no-color.
_xyz_color=0
case "${XYZ_COLOR:-auto}" in
always) _xyz_color=1 ;;
never) _xyz_color=0 ;;
*) [[ -t 1 && -z "${NO_COLOR:-}" ]] && _xyz_color=1 ;;
esac
[[ "${XYZ_NO_COLOR:-0}" == "1" ]] && _xyz_color=0
if [[ "${_xyz_color}" == "1" ]]; then
XYZ_C_RESET=$'\033[0m'
XYZ_C_BOLD=$'\033[1m'
XYZ_C_DIM=$'\033[2m'
XYZ_C_RED=$'\033[31m'
XYZ_C_GREEN=$'\033[32m'
XYZ_C_YELLOW=$'\033[33m'
XYZ_C_CYAN=$'\033[36m'
else
XYZ_C_RESET=""
XYZ_C_BOLD=""
XYZ_C_DIM=""
XYZ_C_RED=""
XYZ_C_GREEN=""
XYZ_C_YELLOW=""
XYZ_C_CYAN=""
fi
xyz_info() { printf '%s[INFO]%s %s\n' "${XYZ_C_GREEN}" "${XYZ_C_RESET}" "$*"; }
xyz_warn() { printf '%s[WARN]%s %s\n' "${XYZ_C_YELLOW}" "${XYZ_C_RESET}" "$*" >&2; }
xyz_error() { printf '%s[ERROR]%s %s\n' "${XYZ_C_RED}" "${XYZ_C_RESET}" "$*" >&2; }
xyz_step() { printf '%s==>%s %s\n' "${XYZ_C_CYAN}" "${XYZ_C_RESET}" "$*"; }
# --- args / init ------------------------------------------------------------
XYZ_ARGS=()
XYZ_YES=0
XYZ_DRY_RUN=0
xyz_parse_global_args() {
local filtered=()
local arg
for arg in "$@"; do
case "${arg}" in
-y|--yes)
XYZ_YES=1
;;
--lang=zh|zh)
XYZ_LANG="zh"
;;
--lang=en|en)
XYZ_LANG="en"
;;
--dry-run)
XYZ_DRY_RUN=1
;;
--no-color)
XYZ_NO_COLOR=1
XYZ_C_RESET=""; XYZ_C_BOLD=""; XYZ_C_DIM=""; XYZ_C_RED=""
XYZ_C_GREEN=""; XYZ_C_YELLOW=""; XYZ_C_CYAN=""
;;
--help|-h)
XYZ_HELP=1
filtered+=("${arg}")
;;
*)
filtered+=("${arg}")
;;
esac
done
XYZ_ARGS=("${filtered[@]+"${filtered[@]}"}")
if [[ "${YES:-}" =~ ^(1|yes|true|YES)$ || "${XYZ_ASSUME_YES:-}" == "1" ]]; then
XYZ_YES=1
fi
# Exported so individual scripts can read flags set here.
export XYZ_ARGS XYZ_YES XYZ_LANG XYZ_HELP="${XYZ_HELP:-}" XYZ_DRY_RUN="${XYZ_DRY_RUN:-0}"
export XYZ_NO_COLOR="${XYZ_NO_COLOR:-0}"
if declare -F xyz_ui_init >/dev/null; then xyz_ui_init; fi
}
xyz_banner() {
local title="${XYZ_TITLE:-$XYZ_NAME}"
printf '\n%s%sxyz.sh/%s%s v%s\n' "${XYZ_C_BOLD}" "${XYZ_C_CYAN}" "${XYZ_NAME}" "${XYZ_C_RESET}" "${XYZ_VERSION}"
printf '%s\n' "${XYZ_C_DIM}----------------------------------------${XYZ_C_RESET}"
printf ' %s: %s/%s\n' "$(xyz_t "Page" "页面")" "${XYZ_BASE}" "${XYZ_NAME}"
printf ' %s: %s/%s.sh\n' "$(xyz_t "Raw" "源码")" "${XYZ_BASE}" "${XYZ_NAME}"
if [[ -n "${XYZ_UPSTREAM:-}" ]]; then
printf ' %s: %s\n' "$(xyz_t "Upstream" "上游来源")" "${XYZ_UPSTREAM}"
fi
printf ' %s\n' "$(xyz_t "No telemetry, no hidden actions." "无遥测、无隐藏操作。")"
printf '%s\n\n' "${XYZ_C_DIM}----------------------------------------${XYZ_C_RESET}"
if [[ -n "${title}" && "${title}" != "${XYZ_NAME}" ]]; then
xyz_step "${title}"
fi
}
xyz_init() {
xyz_parse_global_args "$@"
xyz_detect_os
xyz_banner
}
# --- root / OS --------------------------------------------------------------
xyz_is_root() {
[[ "${EUID:-$(id -u)}" -eq 0 ]]
}
xyz_require_root() {
if ! xyz_is_root; then
xyz_error "$(xyz_t \
"This script must be run as root. Try: sudo bash" \
"请使用 root 运行。可尝试:sudo bash")"
exit 1
fi
}
xyz_prefer_root() {
if ! xyz_is_root; then
xyz_warn "$(xyz_t \
"Not running as root; some information or tests may be limited." \
"当前不是 root,部分信息或测试可能不完整。")"
fi
}
XYZ_OS_ID=""
XYZ_OS_LIKE=""
XYZ_OS_VERSION=""
XYZ_OS_FAMILY="" # debian | rhel | unknown
XYZ_OS_PRETTY=""
xyz_detect_os() {
XYZ_OS_ID=""
XYZ_OS_LIKE=""
XYZ_OS_VERSION=""
XYZ_OS_FAMILY="unknown"
XYZ_OS_PRETTY="unknown"
if [[ -r /etc/os-release ]]; then
# shellcheck disable=SC1091
. /etc/os-release
XYZ_OS_ID="${ID:-}"
XYZ_OS_LIKE="${ID_LIKE:-}"
XYZ_OS_VERSION="${VERSION_ID:-}"
XYZ_OS_PRETTY="${PRETTY_NAME:-$XYZ_OS_ID}"
export XYZ_OS_ID XYZ_OS_LIKE XYZ_OS_VERSION XYZ_OS_FAMILY XYZ_OS_PRETTY
fi
case "${XYZ_OS_ID}" in
debian|ubuntu)
XYZ_OS_FAMILY="debian"
;;
centos|rhel|rocky|almalinux|alma|fedora)
XYZ_OS_FAMILY="rhel"
;;
*)
case " ${XYZ_OS_ID} ${XYZ_OS_LIKE} " in
*debian*|*ubuntu*) XYZ_OS_FAMILY="debian" ;;
*rhel*|*centos*|*fedora*|*rocky*|*alma*) XYZ_OS_FAMILY="rhel" ;;
*) : ;;
esac
;;
esac
}
xyz_os_supported() {
case "${XYZ_OS_ID}" in
debian|ubuntu|centos|rocky|almalinux) return 0 ;;
*) : ;;
esac
case " ${XYZ_OS_LIKE} " in
*debian*|*ubuntu*|*rhel*|*centos*|*rocky*|*alma*) return 0 ;;
*) : ;;
esac
return 1
}
xyz_require_supported_os() {
xyz_detect_os
if ! xyz_os_supported; then
xyz_warn "$(xyz_t \
"Unrecognized distribution: ${XYZ_OS_ID:-unknown} (${XYZ_OS_PRETTY}). Officially supported: Debian, Ubuntu, CentOS, Rocky, AlmaLinux." \
"未能识别的发行版:${XYZ_OS_ID:-unknown}(${XYZ_OS_PRETTY})。官方支持:Debian、Ubuntu、CentOS、Rocky、AlmaLinux。")"
if ! xyz_confirm "$(xyz_t "Continue anyway?" "仍然继续?")"; then
exit 1
fi
else
xyz_info "$(xyz_t "Detected OS:" "检测到系统:") ${XYZ_OS_PRETTY} (${XYZ_OS_FAMILY})"
fi
}
# --- packages / commands ----------------------------------------------------
xyz_need_cmd() {
command -v "$1" >/dev/null 2>&1
}
xyz_pkg_install() {
xyz_detect_os
if (( $# == 0 )); then
return 0
fi
case "${XYZ_OS_FAMILY}" in
debian)
export DEBIAN_FRONTEND=noninteractive
apt-get update -y || xyz_warn "$(xyz_t "apt-get update reported errors (a repository may be unreachable); trying to install anyway." "apt-get update 报错(可能有软件源无法访问),仍尝试安装。")"
apt-get install -y --no-install-recommends "$@"
;;
rhel)
if xyz_need_cmd dnf; then
dnf install -y "$@"
elif xyz_need_cmd yum; then
yum install -y "$@"
else
xyz_error "$(xyz_t "Neither dnf nor yum is available." "找不到 dnf 或 yum。")"
exit 1
fi
;;
*)
xyz_error "$(xyz_t "Cannot install packages on this OS automatically." "无法在此系统上自动安装软件包。")"
exit 1
;;
esac
}
xyz_ensure_cmds() {
local pkg
local missing=()
for pkg in "$@"; do
if ! xyz_need_cmd "${pkg}"; then
missing+=("${pkg}")
fi
done
if ((${#missing[@]} > 0)); then
xyz_info "$(xyz_t "Installing missing commands:" "正在安装缺失命令:") ${missing[*]}"
xyz_pkg_install "${missing[@]}"
fi
}
# --- confirmation (safe with curl | bash) -----------------------------------
# A readable /dev/tty node is not enough: in containers or curl|bash without a
# controlling terminal, open() fails with ENXIO ("No such device or address").
# [[ -r /dev/tty ]] is true in that case and must not be used as the check.
xyz_open_tty() {
# Opens /dev/tty into XYZ_TTY_FD if it is a real terminal. Caller must close.
local fd
XYZ_TTY_FD=""
# Brace group so a failed open cannot leak "No such device or address".
if { exec {fd}<>/dev/tty; } 2>/dev/null && [[ -t "${fd}" ]]; then
XYZ_TTY_FD="${fd}"
return 0
fi
if [[ -n "${fd:-}" ]]; then
exec {fd}>&- 2>/dev/null || true
fi
return 1
}
xyz_close_tty() {
if [[ -n "${XYZ_TTY_FD:-}" ]]; then
exec {XYZ_TTY_FD}>&- 2>/dev/null || true
XYZ_TTY_FD=""
fi
}
xyz_confirm() {
local prompt="$1"
if [[ "${XYZ_YES}" == "1" ]]; then
xyz_info "$(xyz_t "Auto-confirmed (-y / YES=1):" "已自动确认(-y / YES=1):") ${prompt}"
return 0
fi
local reply=""
if xyz_open_tty; then
printf '%s [y/N] ' "${prompt}" >&"${XYZ_TTY_FD}"
# shellcheck disable=SC2162
read -r reply <&"${XYZ_TTY_FD}" || true
xyz_close_tty
else
xyz_warn "$(xyz_t \
"No TTY available for confirmation. Re-run with -y or YES=1 if you accept." \
"没有可用的终端来确认。若你已了解并同意,请加 -y 或 YES=1 重试。")"
return 1
fi
case "${reply}" in
y|Y|yes|YES|Yes) return 0 ;;
*) return 1 ;;
esac
}
# --- download helpers -------------------------------------------------------
# Create the temp dir in the main shell. xyz_tmpdir is usually called inside
# $(...), a subshell, so creating it (and its EXIT trap) there would delete the
# directory as soon as the subshell returned.
xyz_init_tmpdir() {
if [[ -z "${XYZ_TMPDIR:-}" || ! -d "${XYZ_TMPDIR}" ]]; then
XYZ_TMPDIR="$(mktemp -d "${TMPDIR:-/tmp}/xyzsh.XXXXXX")"
# shellcheck disable=SC2064
trap "rm -rf '${XYZ_TMPDIR}'" EXIT
fi
}
xyz_tmpdir() {
if [[ -z "${XYZ_TMPDIR:-}" || ! -d "${XYZ_TMPDIR}" ]]; then
xyz_error "internal: temp dir not initialised"
exit 1
fi
printf '%s' "${XYZ_TMPDIR}"
}
xyz_fetch() {
# xyz_fetch URL DEST
local url="$1"
local dest="$2"
xyz_info "$(xyz_t "Downloading" "正在下载"): ${url}"
xyz_info "$(xyz_t "Saving to" "保存到"): ${dest}"
if xyz_need_cmd curl; then
curl -fsSL --connect-timeout 20 --max-time 180 --retry 2 --retry-delay 1 \
-o "${dest}" "${url}"
elif xyz_need_cmd wget; then
wget -q --timeout=60 -O "${dest}" "${url}"
else
xyz_error "$(xyz_t "Need curl or wget to download files." "需要 curl 或 wget 才能下载文件。")"
exit 1
fi
if [[ ! -s "${dest}" ]]; then
xyz_error "$(xyz_t "Download failed or file is empty:" "下载失败或文件为空:") ${url}"
exit 1
fi
if xyz_need_cmd sha256sum; then
xyz_info "SHA256: $(sha256sum "${dest}" | awk '{print $1}')"
elif xyz_need_cmd shasum; then
xyz_info "SHA256: $(shasum -a 256 "${dest}" | awk '{print $1}')"
fi
}
xyz_run_upstream() {
# xyz_run_upstream URL [args...]
# Downloads an official installer, shows the URL and a short preview, then
# runs it only after confirmation (unless -y / YES=1).
local url="$1"
shift
local dest
xyz_init_tmpdir
dest="$(xyz_tmpdir)/upstream.sh"
xyz_fetch "${url}" "${dest}"
chmod +x "${dest}"
xyz_info "$(xyz_t "Preview (first 20 lines):" "预览(前 20 行):")"
sed -n '1,20p' "${dest}" || true
printf '%s\n' "${XYZ_C_DIM}...${XYZ_C_RESET}"
# Default --dry-run: verify the download and preview, do not execute.
# Scripts that forward --dry-run to upstream (e.g. docker) set
# XYZ_FORWARD_DRY_RUN=1 so the official script still runs with that flag.
if [[ "${XYZ_DRY_RUN:-0}" == "1" && "${XYZ_FORWARD_DRY_RUN:-0}" != "1" ]]; then
xyz_info "$(xyz_t \
"Dry-run: official script downloaded and previewed; not executing it." \
"演练模式:已下载并预览官方脚本,不会执行。")"
return 0
fi
if ! xyz_confirm "$(xyz_t \
"Run this official upstream script?" \
"运行这份官方上游脚本?")"; then
xyz_error "$(xyz_t "Aborted by user." "已取消。")"
exit 1
fi
xyz_step "$(xyz_t "Executing upstream script" "正在执行上游脚本")"
# Never let the upstream script inherit our stdin: under `curl | bash` that
# is the rest of this very script. Give it the terminal if there is one,
# otherwise /dev/null. Interactive installers set XYZ_UPSTREAM_NEEDS_TTY=1.
if xyz_open_tty; then
local tty_fd="${XYZ_TTY_FD}"
XYZ_TTY_FD=""
bash "${dest}" "$@" <&"${tty_fd}"
local rc=$?
exec {tty_fd}>&- 2>/dev/null || true
return "${rc}"
fi
if [[ "${XYZ_UPSTREAM_NEEDS_TTY:-0}" == "1" ]]; then
xyz_error "$(xyz_t \
"This official installer is interactive and needs a terminal. Log in with SSH and run: bash <(curl -fsSL ${XYZ_BASE}/${XYZ_NAME})" \
"这个官方安装脚本需要交互,必须在终端里运行。请用 SSH 登录后执行:bash <(curl -fsSL ${XYZ_BASE}/${XYZ_NAME})")"
exit 1
fi
bash "${dest}" "$@" </dev/null
}
# --- small shared helpers ----------------------------------------------------
xyz_strip_ansi() {
sed -e 's/\x1b\[[0-9;?]*[A-Za-z]//g' -e 's/\r//g'
}
# Effective SSH port: sshd -T (what sshd really uses) > config files > env > 22.
xyz_effective_ssh_port() {
local port=""
if xyz_need_cmd sshd; then
port="$(sshd -T 2>/dev/null | awk '$1=="port" {print $2; exit}' || true)"
fi
if [[ -z "${port}" && -d /etc/ssh/sshd_config.d ]]; then
port="$(cat /etc/ssh/sshd_config.d/*.conf 2>/dev/null | awk 'tolower($1)=="port" {print $2; exit}' || true)"
fi
if [[ -z "${port}" && -f /etc/ssh/sshd_config ]]; then
port="$(awk 'tolower($1)=="port" {print $2; exit}' /etc/ssh/sshd_config || true)"
fi
if [[ -z "${port}" && -n "${SSH_CONNECTION:-}" ]]; then
port="$(printf '%s' "${SSH_CONNECTION}" | awk '{print $4}')"
fi
printf '%s' "${port:-22}"
}
xyz_has_systemd() {
[[ -d /run/systemd/system ]] && xyz_need_cmd systemctl
}
# Back up a file once per run as FILE.xyz-bak-YYYYmmddHHMMSS and print the path.
xyz_backup_file() {
local f="$1"
local bak
bak="${f}.xyz-bak-$(date +%Y%m%d%H%M%S)"
if [[ -e "${f}" ]]; then
cp -a "${f}" "${bak}"
printf '%s' "${bak}"
fi
}
# --- misc -------------------------------------------------------------------
xyz_usage_exit() {
if [[ "${1:-}" != "" ]]; then
printf '%s\n' "$1"
fi
exit 0
}
XYZ_NAME="clean"
# xyz.sh/clean — safe disk cleanup. Shows usage before and after.
# Covers package caches, journal vacuum, old snap revisions, /tmp leftovers
# and large log files. Docker prune only with --docker. Old kernels only
# when listed (never the running one), and only with --kernels.
# --dry-run lists only. Confirmation is required unless -y.
#
# Usage:
# curl -fsSL xyz.sh/clean | bash
# curl -fsSL xyz.sh/clean | bash -s -- --dry-run
# curl -fsSL xyz.sh/clean | bash -s -- -y
# curl -fsSL xyz.sh/clean | bash -s -- -y --docker --kernels
#
# Supported: Debian, Ubuntu, CentOS, Rocky, AlmaLinux. Root required.
# No telemetry.
set -euo pipefail
if [[ -z "${XYZ_COMMON_LOADED:-}" ]]; then
_xyz_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
if [[ -f "${_xyz_dir}/lib/common.sh" ]]; then
# shellcheck source=lib/common.sh
source "${_xyz_dir}/lib/common.sh"
else
echo "xyz.sh: missing lib/common.sh" >&2
exit 1
fi
fi
XYZ_NAME="${XYZ_NAME:-clean}"
XYZ_TITLE="$(xyz_t "Safe disk cleanup" "安全清理磁盘")"
xyz_init "$@"
DO_DOCKER=0
DO_KERNELS=0
DO_AUTOREMOVE=0
for arg in "${XYZ_ARGS[@]+"${XYZ_ARGS[@]}"}"; do
case "${arg}" in
--docker) DO_DOCKER=1 ;;
--kernels|--old-kernels) DO_KERNELS=1 ;;
--autoremove) DO_AUTOREMOVE=1 ;;
--help|-h) XYZ_HELP=1 ;;
*)
xyz_error "$(xyz_t "Unknown argument:" "未知参数:") ${arg}"
exit 1
;;
esac
done
if [[ "${XYZ_HELP:-}" == "1" ]]; then
cat <<HINT
$(xyz_t "Usage:" "用法:")
curl -fsSL xyz.sh/clean | bash -s -- --dry-run
curl -fsSL xyz.sh/clean | bash -s -- -y
curl -fsSL xyz.sh/clean | bash -s -- -y --docker --kernels
$(xyz_t "Default (safe) actions:" "默认(偏安全)的操作:")
- $(xyz_t "Package manager caches: apt clean / yum or dnf clean all" "软件源缓存:apt clean / yum 或 dnf clean all")
- $(xyz_t "systemd journal vacuum to 100M" "把 systemd 日志真空到 100M")
- $(xyz_t "Remove disabled (old) snap revisions, never the active one" "删除已禁用的旧 snap 修订,不动正在使用的")
- $(xyz_t "List leftover files in /tmp older than 7 days (not in use) and remove them" "列出并删除 /tmp 中超过 7 天且未被占用的残留文件")
- $(xyz_t "List log files under /var/log larger than 50M; truncate rotated *.gz / *.old / numbered logs, never the active journal" "列出 /var/log 下大于 50M 的日志;清空已轮转的 *.gz / *.old / 带编号日志,不动正在写入的 journal")
$(xyz_t "Opt-in only:" "需显式打开:")
--docker $(xyz_t "docker system prune -f (unused images, containers, networks; does not use -a/--volumes)" "docker system prune -f(未使用的镜像/容器/网络;不加 -a 或 --volumes)")
--kernels $(xyz_t "remove unused kernels, never the one uname -r is running" "删除未使用的旧内核,永远不会删正在运行的(uname -r)")
--autoremove $(xyz_t "apt autoremove / dnf autoremove (may remove packages you still want)" "apt autoremove / dnf autoremove(可能卸掉你还想留的包)")
$(xyz_t "--dry-run only lists what would be cleaned; nothing is deleted." "--dry-run 只列出将清理的内容,不删除任何东西。")
$(xyz_t "A confirmation is required unless you pass -y." "除非加上 -y,否则会先征求确认。")
HINT
exit 0
fi
xyz_require_root
xyz_require_supported_os
RUNNING_KERNEL="$(uname -r)"
human() {
# human BYTES
awk -v b="${1:-0}" 'BEGIN {
if (b < 1024) { printf "%d B", b; exit }
split("K M G T", u, " "); n = b
for (i = 0; n >= 1024 && i < 4; i++) n = n / 1024
printf "%.1f %sB", n, u[i]
}'
}
disk_used_bytes() {
df -P -B1 / 2>/dev/null | awk 'NR==2 {print $3}'
}
disk_line() {
df -hP / 2>/dev/null | awk 'NR==2 {printf "%s used / %s total (%s), %s available", $3, $2, $5, $4}'
}
size_of() {
local p="$1"
if [[ -f "${p}" ]]; then
wc -c < "${p}" | tr -d ' '
elif [[ -d "${p}" ]]; then
du -sb "${p}" 2>/dev/null | awk '{print $1}'
else
printf '0'
fi
}
PLAN=()
add_plan() {
PLAN+=("$1")
}
run_or_say() {
# run_or_say DESCRIPTION COMMAND...
local desc="$1"
shift
if [[ "${XYZ_DRY_RUN:-0}" == "1" ]]; then
xyz_info "$(xyz_t "Would run:" "将执行:") ${desc}"
return 0
fi
xyz_info "${desc}"
if "$@"; then
return 0
fi
xyz_warn "$(xyz_t "Command failed (continuing):" "命令失败(继续):") ${desc}"
return 0
}
# ---- inspect ----------------------------------------------------------------
xyz_step "$(xyz_t "Current disk usage" "当前磁盘占用")"
xyz_info "$(disk_line)"
BEFORE="$(disk_used_bytes || printf 0)"
# Package caches
pkg_bytes=0
if xyz_need_cmd apt-get; then
pkg_bytes="$(size_of /var/cache/apt)"
add_plan "apt-get clean ($(human "${pkg_bytes}"))"
if [[ "${DO_AUTOREMOVE}" == "1" ]]; then
add_plan "apt-get autoremove -y ($(xyz_t "opt-in" "需显式打开"))"
fi
elif xyz_need_cmd dnf; then
pkg_bytes="$(size_of /var/cache/dnf)"
add_plan "dnf clean all ($(human "${pkg_bytes}"))"
if [[ "${DO_AUTOREMOVE}" == "1" ]]; then
add_plan "dnf autoremove -y ($(xyz_t "opt-in" "需显式打开"))"
fi
elif xyz_need_cmd yum; then
pkg_bytes="$(size_of /var/cache/yum)"
add_plan "yum clean all ($(human "${pkg_bytes}"))"
fi
# journal
if xyz_need_cmd journalctl && [[ -d /run/systemd/system || -d /var/log/journal ]]; then
jsize="$(journalctl --disk-usage 2>/dev/null | grep -oE '[0-9.]+[KMGT]?i?B' | tail -1 || true)"
add_plan "journalctl --vacuum-size=100M (${jsize:-?})"
else
add_plan "$(xyz_t "journalctl / journal not present; skip vacuum" "未检测到 journalctl / journal,跳过 vacuum")"
fi
# snap old revisions
SNAP_REVS=()
if xyz_need_cmd snap; then
while IFS= read -r line; do
# name version rev tracking publisher notes
name="$(printf '%s' "${line}" | awk '{print $1}')"
rev="$(printf '%s' "${line}" | awk '{print $3}')"
notes="$(printf '%s' "${line}" | awk '{print $NF}')"
if [[ "${notes}" == *disabled* && -n "${name}" && -n "${rev}" ]]; then
SNAP_REVS+=("${name}|${rev}")
add_plan "snap remove ${name} --revision=${rev}"
fi
done < <(snap list --all 2>/dev/null | awk 'NR>1' || true)
if [[ "${#SNAP_REVS[@]}" -eq 0 ]]; then
add_plan "$(xyz_t "No disabled snap revisions" "没有可删除的旧 snap 版本")"
fi
else
add_plan "$(xyz_t "snap is not installed; skip old revisions" "未安装 snap,跳过旧版本清理")"
fi
# /tmp leftovers older than 7 days, not directories that are mount points, skip lost+found
TMP_FILES=()
if [[ -d /tmp ]]; then
while IFS= read -r -d '' f; do
TMP_FILES+=("${f}")
done < <(find /tmp -xdev -ignore_readdir_race -type f -mtime +7 -not -path '/tmp/systemd-*' -print0 2>/dev/null || true)
if [[ "${#TMP_FILES[@]}" -gt 0 ]]; then
tsz=0
for f in "${TMP_FILES[@]}"; do
tsz=$((tsz + $(size_of "${f}")))
done
add_plan "$(xyz_t "Remove ${#TMP_FILES[@]} /tmp files older than 7 days" "删除 /tmp 中 ${#TMP_FILES[@]} 个超过 7 天的文件") ($(human "${tsz}"))"
else
add_plan "$(xyz_t "No /tmp files older than 7 days" "没有超过 7 天的 /tmp 残留文件")"
fi
fi
# large rotated logs
LOG_FILES=()
if [[ -d /var/log ]]; then
while IFS= read -r -d '' f; do
case "${f}" in
*.gz|*.xz|*.bz2|*.old|*.[0-9]) LOG_FILES+=("${f}") ;;
*) ;;
esac
done < <(find /var/log -xdev -ignore_readdir_race -type f -size +50M -print0 2>/dev/null || true)
if [[ "${#LOG_FILES[@]}" -gt 0 ]]; then
lsz=0
for f in "${LOG_FILES[@]}"; do
lsz=$((lsz + $(size_of "${f}")))
done
add_plan "$(xyz_t "Remove ${#LOG_FILES[@]} rotated logs larger than 50M under /var/log" "删除 /var/log 下 ${#LOG_FILES[@]} 个大于 50M 的已轮转日志") ($(human "${lsz}"))"
else
add_plan "$(xyz_t "No rotated /var/log files larger than 50M" "没有大于 50M 的已轮转日志")"
fi
fi
# docker (opt-in)
if [[ "${DO_DOCKER}" == "1" ]]; then
if xyz_need_cmd docker; then
add_plan "docker system prune -f ($(xyz_t "unused images/containers/networks only, no -a or volumes" "仅未使用的镜像/容器/网络,不加 -a 或 volumes"))"
else
xyz_warn "$(xyz_t "--docker was set but docker is not installed; skipping." "已指定 --docker,但未安装 docker,已跳过。")"
fi
fi
# kernels (opt-in, never the running one)
KERNEL_PKGS=()
if [[ "${DO_KERNELS}" == "1" ]]; then
if xyz_need_cmd dpkg; then
while IFS= read -r pkg; do
[[ -z "${pkg}" ]] && continue
# package names like linux-image-5.4.0-109-generic
ver="${pkg#linux-image-}"
ver="${ver#linux-image-unsigned-}"
if [[ "${ver}" == "${RUNNING_KERNEL}" || "${pkg}" == *"${RUNNING_KERNEL}"* ]]; then
xyz_info "$(xyz_t "Keeping the running kernel package:" "保留正在运行的内核包:") ${pkg} (${RUNNING_KERNEL})"
continue
fi
KERNEL_PKGS+=("${pkg}")
add_plan "apt-get purge -y ${pkg} ($(xyz_t "not the running kernel" "不是正在运行的内核") ${RUNNING_KERNEL})"
done < <(dpkg-query -W -f='${Package}\n' 'linux-image-*' 2>/dev/null | grep -E '^linux-image-[0-9]' | grep -v -- '-dbg$' || true)
elif xyz_need_cmd rpm; then
while IFS= read -r pkg; do
[[ -z "${pkg}" ]] && continue
if rpm -q --qf '%{VERSION}-%{RELEASE}.%{ARCH}\n' "${pkg}" 2>/dev/null | grep -qx "${RUNNING_KERNEL}"; then
xyz_info "$(xyz_t "Keeping the running kernel package:" "保留正在运行的内核包:") ${pkg} (${RUNNING_KERNEL})"
continue
fi
if [[ "${pkg}" == *"${RUNNING_KERNEL}"* ]]; then
xyz_info "$(xyz_t "Keeping the running kernel package:" "保留正在运行的内核包:") ${pkg} (${RUNNING_KERNEL})"
continue
fi
KERNEL_PKGS+=("${pkg}")
add_plan "yum/dnf remove -y ${pkg} ($(xyz_t "not the running kernel" "不是正在运行的内核") ${RUNNING_KERNEL})"
done < <(rpm -qa 'kernel-core' 'kernel' 'kernel-default' 2>/dev/null || true)
fi
if [[ "${#KERNEL_PKGS[@]}" -eq 0 ]]; then
add_plan "$(xyz_t "No unused kernel packages found (running: ${RUNNING_KERNEL})" "没有发现可删除的旧内核(正在运行:${RUNNING_KERNEL})")"
fi
fi
xyz_step "$(xyz_t "Cleanup plan" "清理计划")"
if [[ "${#PLAN[@]}" -eq 0 ]]; then
xyz_info "$(xyz_t "Nothing obvious to clean." "没有明显可清理的内容。")"
else
i=1
for item in "${PLAN[@]}"; do
printf ' %2d. %s\n' "${i}" "${item}"
i=$((i + 1))
done
fi
if [[ "${DO_DOCKER}" != "1" || "${DO_KERNELS}" != "1" ]]; then
xyz_info "$(xyz_t "Optional (not in this run unless flagged): --docker, --kernels, --autoremove" "未加开关则不执行:--docker、--kernels、--autoremove")"
fi
if [[ "${XYZ_DRY_RUN:-0}" == "1" ]]; then
xyz_info "$(xyz_t "Dry-run: nothing was deleted." "演练模式:没有删除任何东西。")"
xyz_info "$(xyz_t "Disk still:" "磁盘仍为:") $(disk_line)"
exit 0
fi
if ! xyz_confirm "$(xyz_t "Proceed with the cleanup above?" "按上面的计划执行清理?")"; then
xyz_error "$(xyz_t "Aborted by user." "已取消。")"
exit 1
fi
# ---- execute ----------------------------------------------------------------
if xyz_need_cmd apt-get; then
run_or_say "apt-get clean" apt-get clean
if [[ "${DO_AUTOREMOVE}" == "1" ]]; then
run_or_say "apt-get autoremove -y" apt-get -y autoremove
fi
elif xyz_need_cmd dnf; then
run_or_say "dnf clean all" dnf clean all
if [[ "${DO_AUTOREMOVE}" == "1" ]]; then
run_or_say "dnf autoremove -y" dnf -y autoremove
fi
elif xyz_need_cmd yum; then
run_or_say "yum clean all" yum clean all
fi
if xyz_need_cmd journalctl && [[ -d /run/systemd/system || -d /var/log/journal ]]; then
run_or_say "journalctl --vacuum-size=100M" journalctl --vacuum-size=100M
fi
for pair in "${SNAP_REVS[@]+"${SNAP_REVS[@]}"}"; do
name="${pair%%|*}"
rev="${pair##*|}"
run_or_say "snap remove ${name} --revision=${rev}" snap remove "${name}" --revision="${rev}"
done
for f in "${TMP_FILES[@]+"${TMP_FILES[@]}"}"; do
# skip if opened (best-effort, lsof may be missing)
if xyz_need_cmd lsof && lsof -- "${f}" >/dev/null 2>&1; then
xyz_info "$(xyz_t "Skipping in-use file:" "跳过正在使用的文件:") ${f}"
continue
fi
rm -f -- "${f}" 2>/dev/null || true
done
if [[ "${#TMP_FILES[@]}" -gt 0 ]]; then
xyz_info "$(xyz_t "Removed stale /tmp files (or skipped in-use ones)." "已删除过期的 /tmp 文件(占用中的已跳过)。")"
fi
for f in "${LOG_FILES[@]+"${LOG_FILES[@]}"}"; do
rm -f -- "${f}" 2>/dev/null || true
done
if [[ "${#LOG_FILES[@]}" -gt 0 ]]; then
xyz_info "$(xyz_t "Removed oversized rotated logs." "已删除体积过大的已轮转日志。")"
fi
if [[ "${DO_DOCKER}" == "1" ]] && xyz_need_cmd docker; then
run_or_say "docker system prune -f" docker system prune -f
fi
if [[ "${DO_KERNELS}" == "1" && "${#KERNEL_PKGS[@]}" -gt 0 ]]; then
for pkg in "${KERNEL_PKGS[@]}"; do
if [[ "${pkg}" == *"${RUNNING_KERNEL}"* ]]; then
xyz_warn "$(xyz_t "Refusing to remove the running kernel:" "拒绝删除正在运行的内核:") ${pkg}"
continue
fi
if xyz_need_cmd apt-get; then
run_or_say "apt-get purge -y ${pkg}" apt-get purge -y "${pkg}"
elif xyz_need_cmd dnf; then
run_or_say "dnf remove -y ${pkg}" dnf remove -y "${pkg}"
elif xyz_need_cmd yum; then
run_or_say "yum remove -y ${pkg}" yum remove -y "${pkg}"
fi
done
fi
xyz_step "$(xyz_t "Disk usage after cleanup" "清理后的磁盘占用")"
xyz_info "$(disk_line)"
AFTER="$(disk_used_bytes || printf 0)"
if [[ "${BEFORE}" =~ ^[0-9]+$ && "${AFTER}" =~ ^[0-9]+$ ]]; then
if (( AFTER < BEFORE )); then
SAVED=$((BEFORE - AFTER))
xyz_info "$(xyz_t "Freed (approximate, from df):" "大约释放(来自 df):") $(human "${SAVED}")"
else
xyz_info "$(xyz_t "df did not show a drop; some caches may still be reserved by the filesystem." "df 未显示下降;部分缓存可能仍被文件系统预留。")"
fi
fi
xyz_info "$(xyz_t "Cleanup finished." "清理完成。")"
Recommended VPS
These slots are placeholders. No vendor or affiliate link has been added, and nothing here is a purchase button. Real plans and compliant referral links will be filled in later.
Recommended plans coming later
No live merchant or affiliate links have been added yet, so empty purchase slots are hidden. Real plans will appear here with a visible affiliate disclosure.
Promo codes · youhuima.cc — Promo codes may also be listed on youhuima.cc; the merchant’s rules apply.